Panasonic Lumix DMC-LS80 Operating Instructions Manual page 95

• Do not disconnect the USB connection
cable when the cable disconnection
warning icon [K] is indicated.
(Depending on the printer, the icon may
not be displayed.)
• If the remaining battery power becomes
low while the camera and the printer are
connected, the status indicator blinks
and the alarm beeps. If this happens
during printing, press [MENU/SET] and
stop printing at once. If not printing,
disconnect the USB connection cable.
• The camera is receiving an error
message from the printer when the [*]
indication lights orange during printing.
After fi nishing printing, make sure there
are no problems with the printer.
• If the total number of ordered prints or
the number of pictures set for print is
large, printing is performed at intervals.
In such cases, the number of remaining
prints shown on the display will differ
from the number of prints you set. The
discrepancy, however, does not indicate
an error.
• Date print function on the printer may
have priority over the same settings on
the camera. Check the setting on the
printer as well.
VQT1L68_DMC-LS80_GN_EN.indd 95 VQT1L68_DMC-LS80_GN_EN.indd 95
Connecting to other equipment
95
VQT1L68
2007/12/13 11:09:11 2007/12/13 11:09:11