Motion Pictures Mode - Panasonic Lumix DMC-LS80 Operating Instructions Manual

Table of Contents

Advertisement

When the aspect ratio setting is
[j]
Item
30fps16:9
10fps16:9
fps (frame per second); This refers to the
number of frames used in 1 second.
You can record smoother motion pictures
with 30 fps.
You can record longer motion pictures
with 10 fps although the picture quality
is lower.
[10fpsQVGA]:
The fi le size is smaller, so the fi les are
suitable to be attached to e-mails.
* Set [ASPECT RATIO] to [h] and
the [PICT. MODE] to [30fpsQVGA] or
[10fpsQVGA] (320 × 240 pixels) when
you record motion pictures to the built-in
memory.
6
Press [MENU/SET] to close the
menu.
You can also press the shutter
button halfway to close the menu.
The focus range is 5 cm (0.16 feet) to Z
(Wide), 30 cm (0.98 feet) to Z (Tele).
When you use the optical image stabilizer
function, only [MODE1] is available in
motion picture mode.
Refer to
available recording time.
The remaining recordable time shown on
the LCD may not reduce regularly.
This camera cannot take motion pictures
if you are using a MultiMediaCard.
When [PICT.MODE] is set to [30fpsVGA]
or [30fps16:9], we recommend that you
use cards offering "10 MB/s" or higher
speeds (printed on their packages and
elsewhere) for best results.
Depending on the type of SD Memory
Card or SDHC Memory Card, recording
may stop in the middle.
56
VQT1L68
VQT1L68_DMC-LS80_GN_EN.indd 56
VQT1L68_DMC-LS80_GN_EN.indd 56
Advanced-Shooting
Picture size
848 × 480 pixels 30 fps
848 × 480 pixels 10 fps
P111
for information about the
We recommend using Panasonic's SD
Memory Card/SDHC Memory Card.
Depending on the type of card you are
fps
using, the card access indication may
appear for a while after shooting motion
pictures. This is normal.
The volume of motion picture is limited
to 2 GB per recording session. The
maximum available recording time for up
to 2 GB only is displayed on the screen.
When motion pictures recorded with
this camera are played back on other
equipment, the quality of pictures may
be deteriorated or it may not be possible
to play them back. Also the recording
information may not be displayed
correctly.
In motion picture mode [
functions cannot be used.
Direction detection function
[MODE2] on the optical image stabilizer
function
] the following
i
2007/12/13 11:08:47
2007/12/13 11:08:47

Advertisement

Table of Contents
loading

Table of Contents