Optical Characteristics - Philips BRILLIANCE 200P3M User Manual

200P3M/200P3G Product Information
VIDEO
• Video dot rate
• Input impedance
- Video
- Sync
• Input signal levels
• Sync input signal
• Sync polarities
• S-Video
• CVBS
•Video interface
AUDIO-IN
• Input signal level
• Headphone out signal level
• Input signal connector
• Loudspeaker
MICROPHONE
• Sensitivity
• Output impedance
• Directivity
• Frequency range

Optical characteristics

• Contrast ratio:
• Brightness:
• Peak contrast angle
• White Chromatcity:
file:///D|/K1/english/200p3mg/product/product.htm (2 of 7) [1/3/2003 3:34:27 PM]
202 MHz
75 ohm
2K ohm
0.7 Vpp
Separate sync
Composite sync
Sync on green
Positive and negative
Y input 1.0Vpp, C input 0.3Vpp, 75ohm input impedance
Composite, 1.0Vpp, 75ohm input impedance
Triple input(two connectors): D-Sub(analog) and DVI-I(accepts
both digital and analog) are available and user selectable
S-Video & CVBS
0.7 Vpp
32 20+20mW
3.5mm mini jack
4W Stereo Audio (2W/channel RMSx2, 200Hz-12kHz, 4
ohm,THD=10%)
-45dB re 1V/Pa at 1kHz
2.2K max.
-5dB at 180°
300Hz-3kHz
300 (typ.)
2
250 cd/m (typ.)
6 o'clock
x: 0.281 y: 0.311 (at 9300°K)
x: 0.312 y: 0.338 (at 6500°K)