LG 55UB820T Service Manual page 19

▪ (Aging Chamber) Edge & ALEF
Model : (aging chamber)LGD, CMI
Cool
Aging
NC
time x y
4.0
(Min)
271 270
1 0-5 280 285
2 6-10 276 280
3 11-20 272 275
4 21-30 269 272
5 31-40 267 268
6 41-50 266 265
7 51-80 265 263
8 81-119 264 261
9 Over 120 264 260
4.3. Local Dimming Function Check
(1) Turn on TV.
(2) At the Local Dimming mode, module Edge Backlight
moving right to left Back light of IOP module moving.
(3) Confirm the Local Dimming mode.
(4) Press "exit" Key.
4.4. Magic Motion Remote control test
- Equipment : RF Remote control for test, IR-KEY-Code
Remote control for test
- You must confirm the battery power of RF-Remote control
before test(recommend that change the battery per every lot)
- Sequence (test)
1) If you select the 'start key(OK)' on the Adjustment remote
control, you can pairing with the TV SET.
2) You can check the cursor on the TV Screen, when select
the "OK" key on the Adjustment remote control.
3) You must remove the pairing with the TV Set by select
'Mute + OK Key' on the Adjustment remote control.
Copyright © LG Electronics. Inc. All rights reserved.
Only for training and service purposes
Medium Warm
x y x y
285 293 313 329
294 308 319 340
290 303 315 335
286 298 311 330
283 295 308 327
281 291 306 323
280 288 305 320
279 286 304 318
278 284 303 316
278 283 303 315
4.5. 3D function test
(Pattern Generator MSHG-600, MSPG-6100[Support HDMI1.4])
* HDMI mode NO. 872 , pattern No.83
(1) Please input 3D test pattern like below.
(2) When 3D OSD appear automatically, then select green key.
(3) Don't wear a 3D Glasses, Check the picture like below.
4.6. Option selection per country
4.6.1. Overview
- Option selection is only done for models in AJ/JA/IL
4.6.2.Method
(1) Press "ADJ" key on the Adjustment remote control, then
select Country Group Menu.
(2) Depending on destination, select Country Group Code or
Country Group then on the lower Country option, select
US, CA, MX. Selection is done using +, - or ►◄ KEY.
- 19 -
LGE Internal Use Only