Hold Display - Red-D-Arc LN-25x Operator's Manual

LN-25X™
Arc Hours
The LN-25x™ can keep track of the number of hours in which the
unit has been welding.
To change is setting:
• Rotate the WFS knob to the left to turn arc hours off.
• Rotate the WFS knob to the right to turn arc hours on.
hrs
hrs
Press the set-up button to enter the hold display menu.
off
on
B-7

Hold Display

The LN-25x™ will display the actual wire feed speed or amperage
and voltage after welding has stopped. The hold display option will
hold these values for either 10 seconds or 300 seconds.
To change setting:
• Rotate the WFS knob to the left for 10 second hold.
• Rotate the WFS knob to the right for 300 second hold.
hold
hold
hold
Press the set-up button to exit the set-up menu.
OPERATION
SEC
10
300