Removing The Display Assembly; Prerequisites; Procedure - Dell Inspiron 15 7000 Gaming Service Manual

Removing the display assembly

WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.

Prerequisites

1 Remove the base
2 Remove the battery.
3 Remove the rear
4 Remove the wireless
5 Follow the procedure from step 1 to step 8 in
keyboard assembly".

Procedure

1 Using the pull-tab, disconnect the camera cable from the system board.
2 Peel off the camera cable from the computer base.
3 Note the antenna cables routing and remove the antenna cables from the
routing guides on the computer base.
4 Remove the screw (M3x3) that secures the display-cable bracket to the system
board.
5 Lift the display-cable bracket off the computer base.
6 Using the pull tab, disconnect the display cable from the system board.
82
computer. After working inside your computer, follow
After working inside your
cover.
cover.
card.
computer. For more safety best
www.dell.com/
"Removing the palm rest and
Before