Adjustment - JVC LT-26WX84 Service Manual

4.1 ADJUSTMENT PREPARATION
(1) You can make the necessary adjustments for this unit with
either the Remote Control Unit or with the adjustment tools
and parts as given below.
(2) Adjustment with t he Remote Control Unit is made on the
basis of the initial setting values, however, the new setting
values which set the screen to its optimum condition may
differ from the initial settings.
(3) Make sure that AC power is turned on correctly.
(4) Turn on the power for set and test equipment before use,
and start the adjustment procedures after waiting at least
30 minutes.
(5) Unless otherwise specified, prepare the most suitable
reception or input signal for adjustment.
(6) Never touch any adjustment setting value which are not
specified in the list for this adjustment.
(7) Presetting before adjustment
Unless otherwise specified in the adjustment instructions,
preset the following functions with the remote control unit:
4.2 MEASURING INSTRUMENT AND FIXTURES
(1) DC voltmeter (or digital voltmeter)
(2) Oscilloscope
(3) Signal generator (Pattern generator)
[NTSC / 525i / 525p / 750p / 1125i / DIGITAL]
(4) TV audio multiplex signal generator
(5) Remote control unit
1-20 (No.YA003)
SECTION 4

ADJUSTMENT

VIDEO STATUS
BRIGHT / CONTRAST / COLOR / TINT Center
COLOR TEMPERATURE
DIGI. NOISE CLEAR
COLOR MANEGMENT
NATURAL CINEMA
DIGITAL VNR
TREBLE / BASS / BALANCE
BBE
AHS
AHB
Setting item
STANDARD
LOW
OFF
STANDARD
OFF
OFF
00
OFF
OFF
OFF
Settings