Adjustment - JVC LT-26A61SJ Service Manual

4.1 ADJUSTMENT PREPARATION
(1) The adjustment using the REMOTE CONTROL UNIT is
made on the basis of the initial setting values. The
setting values which adjust the screen to the optimum
condition can be different from the initial setting
values.
(2) Make sure that connection is correctly made AC to AC
power source.
(3) Turn on the power of the TV and measuring instruments for
warming up for at least 30 minutes before starting
adjustments.
(4) If the receive or input signal is not specified, use the most
appropriate signal for adjustment.
(5) Never touch the parts (such as variable resistors,
transformers and condensers) not shown in the adjustment
items of this service adjustment.
4.5 BASIC OPERATION OF SERVICE MODE
4.5.1 HOW TO ENTER THE SERVICE MODE
(1) Press [INFORMATION] key and [MUTING] key on the
remote control unit simultaneously to enter the SERVICE
MODE SCREEN. (Fig.1)
SERVICE MODE SCREEN
SERVICE MENU SERVICE MENU
1.ADJUST 1.ADJUST
2.SELF_CHECK 2.SELF_CHECK
3.I2C STOP 3.I2C STOP
4.OPTION 4.OPTION
NOTE:
• As self check feature
"2.SELF_CHECK" cannot be selected (screen display
only).
• Before entering the SERVICE MODE, confirm that the
setting of VCR/TV/DVD switch is at the "TV" side. If the
switches have not been properly set, you cannot enter the
SERVICE MODE.
4.5.2 HOW TO EXIT THE SERVICE MODE
Press the [MENU] key to exit the Service mode.
SECTION 4

ADJUSTMENT

Not used
(Display only)
Fig.1
is not used in this
4.2 PRESET SETTING BEFORE ADJUSTMENTS
Unless otherwise specified in the adjustment items, preset the
following functions with the REMOTE CONTROL UNIT.
Setting item
PICTURE MODE
PICTURE adjustments
COLOUR TEMP.
4.3 MEASURING INSTRUMENT AND FIXTURES
• Signal generator (Pattern generator)[PAL]
• Remote control unit
4.4 ADJUSTMENT ITEMS
4.5.3 CHANGE AND MEMORY OF SETTING VALUE
SELECTION OF SETTING ITEM
• [FUNCTION
For scrolling up / down the setting items.
CHANGE OF SETTING VALUE (DATA)
• [FUNCTION / ] key.
For scrolling up / down the setting values.
MEMORY OF SETTING VALUE (DATA)
Changed setting value is memorized by pressing [MUTING]
key.
4.5.4 SERVICE MODE SELECT KEY LOCATION
MUTING
NUMBER
TV,
INFORMATION
FUNCTION /
Settings position
STANDARD
Centre
NORMAL
/ ] key.
VCR/TV/DVD
switch
MENU
FUNCTION
(No.YA369)1-15
/