Wireless Remote Controller; Program Timer; Sleep Timer - Fujitsu AR*9LUAB Manual

2-2. WIRELESS REMOTE CONTROLLER

2-2-1. CASSETTE, UNIVERSAL AND WALL MOUNTED TYPE MODEL
FEATURES
Four kinds of timer setup (ON / OFF / PROGRAM / SLEEP) are possible.
Four kinds of timers. Easy operation.
Easy to change transmission code (4 patterns) by button operation.
Built-in timers
Select from four different timer programs (On/Off/Program/Sleep).

Program timer

The program timer operates the ON and OFF timer once within a 24 hour period.

Sleep timer

The sleep timer function automatically corrects the temperature thermostat setting according to
the time setting to prevent excessive cooling and heating while sleeping.
Cooling operation/dry operation
When the sleep timer is set, the set temperature
automatically rises 1 °C every hour. The set
temperature can rise up to a maximum of 2 °C.
60min.
Easy operation
Mixed-up
• Code selector switch eliminates unit
being wrongly switched.
(Up to 4 codes can be set.)
Timer setting
2 °C
1 °C
After code change
A B C D
A B C D
• Wide and precise
transmitting range.
Heating operation
When the sleep timer is set, the set temperature
automatically drops 1 °C every 30 minutes. The
set temperature can drop to a maximum of 4 °C.
1 °C
30min.
60min.
90min.
Timer setting
1. Press the MASTER CONTROL
button for more than five seconds
to start the code change.
2. Press the (+) or (-) button to
select the desired code.
A
3. Press the MASTER CONTROL
button again to end the code
change.
- (01 - 06) -
2 °C
3 °C
4 °C
B C D