Canon CS100 Instruction Manual page 45

Uploading Still Photos from the Terminal
Import still photos on a terminal to Connect Station.
Movies cannot be uploaded.
A transmission error may occur if a power saving feature of the terminal is activated
during the upload.
If the power saving feature of the terminal is activated, the communication with
Connect Station will be disconnected.
While downloading images from the camera/camcorder or card, uploading images
from the terminal cannot be performed. Likewise, uploading images from two or more
terminals at the same time cannot be performed.
44
1
Display the upload screen on
the terminal.
From the menu, select [Upload].
2
Select [Select images].
3
Select an image.
When you select an image on the
terminal, the selected image will
be added to the upload screen.
To select another image, select
[Select images] again.
Up to six images can be selected.
4
Select [Upload images].
The images will be sent to
Connect Station.
When the upload is complete,
select [OK].
To send other images, select
[Select images] again.
5
Exit the upload screen.
By selecting [L] on the upper left
of the screen, you can return to
the previous screen.