Canon CS100 Instruction Manual page 43

Displaying by Entering an IP Address
If the terminal does not support NFC, display the operation screen by entering an IP
address into the Web browser.
Example of an IP address
Example of an IP address
42
1
Select [Preferences] in
Connect Station.
Select [Preferences] on the
Home screen.
2
Check the IP address.
The number displayed on the
lower right of the [Preferences]
screen is the IP address.
3
Operate the terminal to
connect to the access point,
router, etc. to which Connect
Station is connected.
4
Start the Web browser on the
terminal.
5
Enter the IP address into the
terminal.
Enter the IP address you checked
in step 2 in the address field of
the Web browser.
6
Operate the terminal to log in
to Connect Station.
On the terminal screen, select
[OK].
The album list screen will appear
(p.43).