Canon CS100 Instruction Manual page 19

4-A
[WPS Push button connection (PBC)]
First, check whether the access point you will use supports WPS (Wi-Fi Protected
Setup).
18
3
Select an item.
Select an item, then press <S>.
Select a step as appropriate for
the item.
• [Find network]:
Go to step 4-B (p.19).
• [WPS Push button
connection (PBC)]:
Go to step 4-A.
• [Skip Wi-Fi settings]:
Go to step 5.
When Connect Station is
connected via a wired LAN (p.16),
this screen will not be displayed.
Go to step 5.
Press the access point's WPS
button while the screen shown on
the left is displayed.
For details about where the
button is located and how long to
press it, refer to the access
point's instruction manual.
When the connection is complete,
the [Set date/time] screen will
appear.
5
Set the date and time.
Press the <h> <g> keys to select
the item you want to change and
press the <d> <f> keys to
change the value.
When you finish the setup, press
<S>.
6
Check the settings.
When the setting complete
screen appears, the initial setting
is complete. Check the settings,
then press <S>.
The Home screen will appear
(p.20).