Canon CS100 Instruction Manual page 4

Before Using Connect Station
To avoid accidents and malfunctions, first read the "Safety Precautions" (p.6-7) and
"Handling Precautions" (p.8-9).
Copyrights
Copyright laws in your country may prohibit the use of imported image data of any
copyrighted subject in this product for anything other than private enjoyment. Also be
aware that certain public performances, exhibitions, etc., may prohibit photography
even for private enjoyment.
Backup and Disclaimer of Liability for Image Data
This product is a precision instrument with a built-in hard disk and may lose its image
data due to a sudden malfunction or other problem. Therefore, backing up the data to
an external hard disk is recommended in case of inadvertent erasure or a
malfunction.
If imported image data is destroyed or lost due to a failure of this product, Canon will
not repair or recover the image data. Be advised that Canon cannot be held liable for
any destruction or loss of image data.
Handling of This Product
This product has a hard disk built in it. The hard disk may malfunction or have
imported image data destroyed or lost due to physical shock, vibration, etc. To
protect the hard disk, follow the instructions below, regardless of whether the product
is in use or standing by.
Do not subject the product to physical shock or vibration, or drop it.
Install the product in a level place.
Do not put or drop the camera/camcorder or other objects onto the product.
Do not block the inlet or outlet of the product.
Do not put the product in the following locations.
• Dusty or humid locations
• Extremely hot or cold locations (Operating environment: Temperature 0°C - 35°C /
32°F - 95°F; Relative humidity 20% - 85% / No dew condensation is allowed.)
• Locations exposed to direct sunlight
• Locations of low pressure (3,000 m / 9,843 ft. or more above sea level)
• Locations where a strong magnetic field such as a magnet or electric motor is
present
• Poorly ventilated locations
• Locations where chemicals are handled, such as a laboratory
The product is not dustproof or splashproof.
3