Hpe 5130 24G Sfp 4Sfp+ Ei - HPE FlexNetwork 5130 EISeries Installation Manual

Figure 48 Rear panel
(1) AC-input power receptacle
(3) Grounding screw

HPE 5130 24G SFP 4SFP+ EI

Figure 49 Front panel
(1) 100/1000Base-X SFP port
(3) 10/100/1000Base-T autosensing Ethernet port
(5) SFP+ port
(7) Console port
(9) Power supply 1 status LED (PWR1)
Figure 50 Rear panel
1
(1) Grounding screw
(3) Power supply slot 2
The HPE 5130 24G SFP 4SFP+ EI switch comes with no power supply or filler panel in power supply
slot 1 and a filler panel in power supply slot 2. You can install one or two power supplies for the switch
as needed. In
information about installing and removing a power supply, see
supply (HPE 5130 24G SFP 4SFP+ EI
Figure 50, two PSR150-A1 (JD362B) AC power supplies are installed. For more
(2) RPS receptacle
(2) 100/1000Base-X SFP port LED
(4) 10/100/1000Base-T autosensing Ethernet port
LED
(6) SFP+ port LED
(8) System status LED (SYS)
(10) Power supply 2 status LED (PWR2)
2
(2) Power supply slot 1
switch)."
37
3
"Installing and removing a power