Connecting The Switch To An Ac Power Source - HPE FlexNetwork 5130 EISeries Installation Manual

Switch model
The HPE 5130 24G SFP 4SFP+ EI switch provides two power supply slots. The
PSR150-A/PSR150-A1 (JD362A/JD362B) and PSR150-D/PSR150-D1 (JD366A/JD366B) power
supplies are available for the HPE 5130 24G SFP 4SFP+ EI switch. The PSR150-A/PSR150-A1
(JD362A/JD362B)power
(JD366A/JD366B) power supply supports –48 V DC power input and RPS power input.

Connecting the switch to an AC power source

Securing the AC power cord for a hot-swappable AC power supply
Insert the cable tie through the hole in the power supply handle.
1.
Use the cable tie to secure the AC power cord to the power supply handle.
2.
Figure 20 Securing the AC power cord for a hot-swappable AC power supply
Securing the AC power cord for a fixed power supply
Insert the cable tie through the cable bridge.
1.
Use the cable tie to secure the AC power cord to the cable bridge.
2.
Available power source
HPE A-RPS1600
supply supports AC
16
power input. The
Connection
procedure reference
Connecting the switch to
an RPS
PSR150-D/PSR150-D1