Setting Up The Massager - Sanyo HEC-A3700 Instruction Manual

SETTING UP THE MASSAGER

Moving the massager
CAUTION
When two people are carrying the
massager
¡Hold the massager by the back rest and foot rest
while moving it.
Foot rest
Note:
Setup location
CAUTION
1
Place carpet or a similar material
over the setup location.
¡This will help prevent the floor surface from
becoming scratched and reduce the amount of
noise during operation.
7
¡Do not release the foot rest suddenly while holding it by hand.
Back rest
¡Be sure to disconnect the power plug from the wall outlet before moving the massager.
¡Be careful not to run over the power cord or the remote control with the casters.
¡If moving the massager across floor surfaces that can easily get scratched or over
matting or concrete, have two people carry it.
¡Position the massager on a stable, level surface. Do not use it in
environments which are high in humidity such as bathrooms.
Carpet
Note:
When moving the massager using
the casters
¡Tilt up the front and move the massager on the
casters.
Press the ZERO-G button
to fold down the back rest.
2
Leave enough space for the
massager to be reclined.
¡Leave 50 cm (19 3/4") or more of space in front
and 55 cm (21 3/4") or more of space behind the
massager so that it will not hit walls or other
objects when it is being reclined.
Foot rest
50 cm (19 3/4")
or more
¡Do not set up the massager in places which are
subject to high temperatures, such as such places
which receive direct sunlight for long periods of time
and places near heating equipment.
¡Leave a distance of 1 meter (39 1/2") or more
between the massager and audio-visual equipment
such as TVs and radios, otherwise it may be affected
by interference.
Caster
55 cm (21 3/4")
or more
Back rest