Table of Contents
Advertisement
3
The shape sensor measures the position of the shoulders and automatically
adjusts the positions of the massaging rollers to suit.
(The SHAPE SENSOR indicator will flash while the shoulder position is being measured, and it will illuminate
when measurement is complete.)
¡Check that the massaging rollers are at the correct
shoulder height.
If they are not at the correct shoulder height but are
close to the shoulders, press the ROLLER POSITION
button to adjust the height of the massaging rollers to
match the shoulder height.
If the massaging rollers still do not match the shoulder height even
after they have been adjusted, move your body to adjust the height.
The position can be adjusted for people with a height in the range
of 150 cm (59 1/4") to 180 cm (71").
4
Adjust the foot massaging.
¡Massaging is carried out first at medium.
¡The strength of massaging changes in the order weak –
medium – strong - stop and the corresponding indicators
illuminate each time the CALF & FOOT button is pressed.
¡If you halt the foot massaging before the course is
finished and change to a different automatic course, foot
massaging will not start again automatically.
■ After approximately 15 minutes, the timer will expire and massaging will
stop automatically.
¡The ON/OFF button will flash and the massaging rollers will move to the highest position and then stop.
¡Because separate timers operate for back massaging and foot massages, the foot massages will stop first if you
change to a different automatic course before the current course is finished.
¡If the timer for back massaging has expired, the foot massaging will stop at the same time.
If you would like to stop massaging before it is finished by timer
Press the ON/OFF button.
¡All massaging will stop.
(The ON/OFF button will flash and the massaging rollers will move to their highest position and then stop.)
Stopping the chair immediately if you feel an abnormal physical sensation or a problem with the chair itself
Press the STOP button.
The massaging rollers will
move to the widest position and
then stop. Other operations will
stop immediately.
¡The massaging rollers will lift by 2 cm
(3/4") each time the ▲ button is pressed.
¡The massaging rollers will drop by 2 cm
(3/4") each time the ▼ button is pressed.
Restarting operation
qPress the RECLINING button or the HOME button to return the massager
to the home position.
wPress the ON/OFF button.
The massaging rollers will move to their highest position and then stop.
eTo have a massage, press a button to select a massage course.
Too high position
Massaging
rollers
Suitable position
Too low position
Weak (Medium)
(The indicators switch off)
Strong
Stop
14
Advertisement
Table of Contents
