Table of Contents
Advertisement
ADJUSTING THE CHAIR
1
Press the HOME button to return
the massager to the home position.
Foot rest
2
Press the ON/OFF button.
¡The foot rest will lift up slightly.
3
Attach the head cover.
Hook-and-loop fasteners
Remove the hook-and-
loop fastener and pass
it through the cord.
Cord
Head cover
Back rest
4
Place the remote control into the stand.
Remote control
9
5
Lower the arm
rests.
Back rest
¡To ensure safety, check the positions of the
Align the hook-and-
loop fasteners.
¡Do not sit down or get up from the chair while the
Note:
6
Stand
Note:
Sit in the middle of the chair.
¡Sit deeply into the massager so that your waist
touches the back rest.
You can sit easily by
raising the arm rests
and sitting into the
massager from the
side.
CAUTION
massaging rollers before leaning slowly back on the
massager. Do not twist the body, but lean straight
back on the massager, so that the massaging
rollers are in position on either side of the spine.
Middle of chair
foot rest or seat are raised.
¡Do not attempt to place anything or sit on the foot
rest. The user may fall over, resulting in an accident
or injury.
Adjust the position of the head cover.
¡Adjust the position of the head cover so that it does
not touch your shoulders during the massage.
Head cover
¡The head cover contains a weight, so do not shake
it or throw it around, otherwise it may cause injury.
Foot rest
Advertisement
Table of Contents
