e
Connect the right fan cable to the system board.
f
Route the touch-screen cable through the routing guides on the right fan.
g Adhere the tape that secures the touch-screen cable to the right fan.
h Connect the display cable to the system board.
i
Replace the four M2x4 screws that secure the right fan to the system board.
2
Follow the procedures in After Working Inside Your Computer.
Heat sink
Removing the Heatsink
1
Follow the procedures in
2
Remove the:
a
Base cover
b
battery
3
Remove the four M2x3 screws that secure the heatsink to the system board.
4
Lift the heatsink off the computer.
20
Removing and installing components
Before Working Inside Your
Computer.