Haier DW12-PFE2-E Service Manual page 25

Service Manual
Issue
Rev.
Model No: DW12-PFE2-E/DW12-PFE2-U/DW12-PFE2ME-U
indicator "E" goes out.
--Press programme button " I " to choose the desired programme.
E
D F
I
--After 3 seconds the delayed start indicator "E" blinks, the time- remaining indicator " F" will blink
and decrease, the programme will start until the delayed start indicator " F" goes out.
Cancelling or modifying a cycle
A cycle that is underway can be modified if it has only been running for a short time. Otherwise,
the detergent may have already been used, and the appliance may have already drained the
wash water.
If this is the case, the detergent dispenser must be refilled ( see the paragraph entitled, " Loading
the detergent ").
To modify a cycle that is already underway, follow the instructions contained in the paragraph
entitled "Reset drain function", and select the programme you wish(see the paragraph entitled,
"Switching the dishwasher ON".)
Reset drain function
You can use "Reset drain function"to stop the washing cycle under running by pressing and
holding the "I1" and "I3" for 3 seconds, and the appliance will stop after a few minutes drain
phase.
I1 I3
Speedup Wash
You could save your washing time when push button "B" after choosing the programme.
Suggestion
Use this function when there is less cutlery loading.
C
A
B
24