Table of Contents
Advertisement
Hardware Overview
Camera Layout
No.
Name
1
IR LEDs
2
Ambient light sensor
3
Lens
4
Lens hood
5
All-in- one ter minal
cable
6
Reset button
7
Ethernet port
8
Tilt adjustment screw
9
Pan adjustment screw
4
Product Overview
Description
Provides additional lighting in low light conditions
Feeds information on environmental lighting
condition to the camera
Vari-focal, f 3~9 mm, F1.2~2.1, auto iris, megapixel, IR-
corrected
For eliminating unnecessary light; direction adjustable
Intergrating power, IO, Ethernet, and audio in/out
cable, plus a reset control
Press and hold the reset button for about 8 seconds to
reset the camera back to factory defaults
For connection to a PoE or Non-PoE network switch/
router
For holding the tilting position of the camera
For holding the panning position of the camera
Advertisement
Table of Contents
