Change Sd Memory Card - COMPRO TN3230 Installation Manual

7. Having obtained the optimal result, re-install the top cover to complete the op-
eration.

Change SD Memory Card

The camera comes with a 4GB microSD card pre-installed inside the housing. The SD
memory card is user-upgradeable. And if you like to replace it, refer to the steps below
that explain the procedure.
1. Loosen the fixing screws on the top cover and remove the top cover.
2. Locate the microSD card slot below the camera's LED status indicator. Unplug
the digital IO cable and audio cables from the camera, and then push the pre-
installed SD card gently to release it.
3. Pull the SD card out and insert a new one into the slot, and re-connect the digital
IO cable and audio cables. Finally, re-install the top cover to complete the up-
grade.
microSD/SDHC
card slot
Installation 13