Remote Control Functions - Audiovox VE 640 Installation And Operation Manual

REMOTE CONTROL FUNCTIONS

1. POWER ON/OFF (PWR)
Press this button to turn the TV on. Press the button again to turn the TV off.
2. NUMERICAL BUTTONS (1- 9, 0)
Use these buttons to make a direct channel selection. The channel number chosen will be displayed
on the front panel of the VE-640. Channel selection is carried out using the 0-9 keys.
3. CHANNEL UP/DOWN BUTTONS (CH)
Use these buttons to advance to the next higher or lower channel.
4. VOLUME UP/DOWN BUTTONS (VOL)
Use these buttons to increase or decrease the volume.
5. FM/AM BUTTON (FM/AM)
Each time this button is pressed, the VE-640 will alternate between AM and FM stereo.
6. MUTE BUTTON (MUTE) Indicated by 6 flashing LED's on front panel.
Press this button to remove all sound. Pressing the button again restores sound to the previously
set level. The mute feature may also be released by pressing the VOLUME UP/DOWN BUTTONS.
7. CLEAR BUTTON (CLR)
Press this button to erase an incorrect channel entry.
8. TELEPHONE BUTTON (TEL)
Press this button to answer your telephone from your VE-640.
9. SEEK BUTTONS (SEEK)
Tunes the VE-640 to next station of sufficient signal strength.
10. ENTER (ENT)
Pressing the enter button (ENT) will cause the channel change to occur immediately.
11. TV-Select TV function.
10
1
3
PWR
VOL
CH ENT
VOL
A/N A/V
2
1 2
4 5
8
7
4
8
11
TV
TEL TV/CA
9
MUTE
CH
SEEK
FM/AM
3
CLR
6
9 0
-7-
6
NOTE: The remote
control has a magnet
on the rear of the
5
control for easy
storage on a metal
7
surface. (Do not store
on oven or range).