Grandstream Networks GWN7610 User Manual page 32

RSSI Enabled
Minimum RSSI (dBm)

Device Membership: Used to add or remove paired access points to the network group.
Click on to add the GWN7610 to the network group, or click on
Users can Also add a device to a Network Group from Access Points Page:
- Select the desired AP to add to a Network Group and click on
Check to enable RSSI function, this will lead the AP to disconnect users
below the configured threshold in Minimum RSSI (dBm).
Enter the minimum RSSI value in dBm. If the signal value is lower than the
configured minimum value, the client will be disconnected. The input range
is from "-94" or "-1".
Figure 26: Device Membership
GWN7610 User Manual
to remove it.
P a g e | 32