Clearance Requirements - Cisco Nexus 9372TX Hardware Installation Manual

Clearance Requirements

Clearance Requirements
You must provide the chassis with adequate clearance between the chassis and any other rack, device, or
structure so that you can properly install the chassis, route cables, provide airflow, and maintain the switch.
For the clearances required for an installation of this chassis in a four-post rack, see the following figure.
1
2
3
4
Both the front and rear of the chassis must be open to both aisles for airflow.
Note
Cisco Nexus 9372TX and 9372TX-E NX-OS Mode Switches Hardware Installation Guide
10
Chassis
Vertical rack-mount posts and rails
Chassis width
Width of the front clearance area (this equals
the width of the chassis with two rack-mount
brackets attached to it)
5 Depth of the chassis
6 Maximum extension of the bottom-support rails
7 Depth of the front clearance area (this equals the
depth of the chassis)
Preparing the Site