Quitting The Control Center - NetComm NP3680W User Manual

SetEmailConfiguration
• SMTPProtocol: select or clear Enable SMTP support
• SMTPServerName:enter your SMTP server's Host Name or IP address.
• SMTPPortNumber: set new SMTP server's TCP port number (default: 25).
• Subject: enter the subject of the e-mail.
• FromAddress: enter the sender's e-mail address.
• ToAddress: enter an e-mail address to send that mail to a person.
• Cc:stands for carbon copy; enter an e-mail address to send that mail to a second person.
• SMTPServerrequiresauthentication: login to remote SMTP server which requires authentication.
• AccountName: enter account name for remote SMTP server.
• Password:enter account's password for remote SMTP server.
Maintenance
If you want to restart the NP3680W, restore the NP3680W to factory defaults, download new firmware file
from product's public website and upgrade new firmware, you can use the Maintenance tool.
• RestartServer: click this button, the Server will restart.
• FactoryDefault: click this button, the Server will restore factory default values.
• DownloadNewFirmware:click this button to download new firmware or user software from this
product's public website.
• UpgradeFirmware:click Open to find the firmware file to be upgraded. Click Upgrade to upload the
firmware into the Server.

7.3 Quitting the Control Center

The Control Center doesn't really quit if you click the "X" box (close box) at the top right corner of the window.
Instead, the it just minimizes itself to the system tray. There are two ways to really close the Control Center.
The first way is choosing "Exit" item in the "File" menu in the Control Center. The second way is right-clicking
the icon of the Control Center in the system tray and choosing the "Exit" item.
 NP3680W User Guide
YML838 Rev 2