Table of Contents
Advertisement
ENGLISH
MTR-25-10W-RGBW User manual
long time to return to main menu.
Second device setting: press MENU button to
(master/slave mode), choose and
confirm
(slave2 mode). After 10seconds or press MENU long time to return to
main menu.
Third device setting: press MENU button to
(master/slave mode), choose and
confirm
(slave4 mode). After 10seconds or press MENU long time to return to
main menu.
Fourth device setting: press MENU button to
(master/slave mode), choose and
confirm
(slave3 mode) . After 10 seconds or press MENU long time to return to
main menu.
Use DMX cable to connect the 4pcs devices as shown on "DMX-512 Connection" on
page 10.
4.3. 16pcs use and display settings
Please mount the 16 modules following the instructions described in "2.2. Module Me-
chanical Connection" on page 7. Then set one by one as below picture show.
To set one device as master firstly, press MENU button to
(master/slave mode).
Choose and confirm
(master mode), then press MENU button to
(show
mode). Choose and confirm
(16pcs using effect), then the second device press
MENU button to
(master/slave mode), choose and confirm
(slave2
mode), the third device choose and confirm
, then set one by one to
.
After 10 seconds or press MENU long time to return to main menu.
18
Advertisement
Table of Contents
