Connections - Soundstream MTR-25-10W-RGBW User Manual

MTR-25-10W-RGBW User manual

2.3. Connections

3.2.1 Mains Connections
Connect the device to the mains with the power-plug. The wire correspondence is as
follow:
The earth must to be connected! Pay attention to safety!
In case of a large number of units, it is advisable to use a three-phase mains connec-
tion and distribute the modules in equal parts on the three lines. Before taking into
operation for the first time, the installation has to be approved by an expert.
DMX-512 Connection
Wires must not come into contact with each other; otherwise the fixtures will not work
at all, or will not work properly.
Only use a dual-shielded cable and 3-pin XLR plugs and connectors in order to control
with the fixture or one fixture with another.
Cable
Brown
Blue Neutral
Yellow/Green
DMX use of XLR connectors
1 = Ground / Shield
2 = DMX +
3 = DMX -
INPUT
Pin International
Live L
N
Earth
OUTPUT
ENGLISH
11