ENGLISH
MTR-25-10W-RGBW User manual
4. DEVICE USE AND SETTING
4.1.
1pc use and display settings
Press MENU button to
(master/slave mode), choose and confirm
(master mode), then press MENU button to
(show mode), choose and confirm
(1 or 2pc device show mode). After 10 seconds or press MENU long time to
return to main menu.
4.2. 4pcs use and display settings
Assemble the 4 modules following the instructions described in "2.2. Module Mechani-
cal Connection" on page 7. Then set one by one as below picture show.
First device setting: press MENU button to
(master/slave mode). Choose and
confirm
(master mode), then press MENU button to
(show mode).
Choose and confirm
(4pc device show mode). After 10 seconds or press MENU
17