Table of Contents
Advertisement
How to set the water softener
level
The appliance must be in programme
selection mode.
1. To enter the user mode, press and
hold simultaneously
until the indicators
and
start to flash.
2. Press
.
• The indicators
go off.
• The indicator
flash.
• The end indicator starts to flash.
The number of flashes indicates
the level.
– E.g. 5 flashes + pause + 5
flashes = level 5.
3. Press
again and again to
change the setting. Each time you
press
the level number
increases. After level 10 you will start
again from level 1.
4. Press the on/off button to confirm
the setting.
6.3 The rinse aid dispenser
The rinse aid helps to dry the dishes
without streaks and stains.
The rinse aid is automatically released
during the hot rinse phase.
You can set the released quantity of rinse
aid between level 1 (minimum quantity)
and level 6 (maximum quantity). Level 0
will deactivate the rinse aid dispenser
and no rinse aid will be released.
Factory setting: level 4.
How to set the rinse aid level
The appliance must be in programme
selection mode.
1. To enter the user mode, press and
hold simultaneously
until the indicators
and
start to flash.
2. Press
.
and
,
,
,
and
3. Press
continues to
4. Press the on/off button to confirm
6.4 The rinse aid empty
notification
The rinse aid helps to dry the dishes
without streaks and stains.
The rinse aid is automatically released
during the hot rinse phase.
When rinse aid chamber is empty, the
rinse aid indicator is turned on notifying
to refill rinse aid. If you are using multi-
tabs containing rinse aid and you are
satisfied with the drying result, you can
deactivate the notification for refilling
rinse aid. However, we recommend that
you always use rinse aid for best drying
performance.
If you use standard detergent or multi-
tablets without rinse aid, activate the
notification to keep the rinse aid refill
indicator active.
How to deactivate the rinse
aid dispenser
The appliance must be in programme
selection mode.
and
1. To enter the user mode, press and
,
,
• The indicators
go off.
• The indicator
flash.
• The end indicator starts to flash.
The number of flashes indicates
the current setting: e.g. 4 flashes
+ pause + 4 flashes = level 4.
– The levels of rinse aid are
from 0 to 6.
– Level 0 = no rinse aid is
released. In this case the end
indicator remains off.
again and again to
change the setting. Each time you
press
the level increases.
After level 6 you go to level 0 and
then start again from level 1.
the setting.
hold simultaneously
until the indicators
and
start to flash.
ENGLISH
9
,
and
continues to
and
,
,
Advertisement
Table of Contents
