Quick Operation Guide of DS-6700 Series Audio/Video Encoder
You can also click
added to the list.
Note:
You can click
or
the device table and hide the network parameter panel on the right side, or click
parameter panel.
Modifying Network Parameters
Steps:
1.
Select the device to be modified in the device list and the network parameters of the device will be displayed
in the Modify Network Parameters panel on the right side.
2.
Edit the modifiable network parameters, e.g., IP address, port number and gateway.
3.
Enter the password of the admin account of the device in the Password field and click
changes.
Access to DS-6700 by Client Software
Click StartAll ProgramsiVMS-4200 Client to start the client software. After successful login, you can enter
the following main interface of the client software.
Adding Device
Steps:
1.
Click Control Panel > Device Management to enter the Device Management page:
to refresh the online device list manually. The newly searched devices will be
on each column heading to order the information; you can click
13
to expand
to show the network
to save the