Back Panel - Cisco RV315W Quick Start Manual

Back Panel

3G USB
Insert a 3G USB dongle into this port to connect your
Port
RV315W to a 3G wireless network. To get the list of 3G
USB dongle models supported by the RV315W, go to
www.cisco.com/go/rv315w.
USB Port Insert a USB storage device into this port to save syslog
messages.
WAN0 Port The WAN0 (Internet) port is connected to your Internet
device, such as a cable or DSL modem.
WAN1/ The WAN1/LAN0 port can be set to a secondary WAN
LAN0 Port interface (WAN1) or an additional LAN interface (LAN0).
LAN1-8 These ports provide a LAN connection to network devices,
Ports such as PCs, print servers, or switches.
RESET The RESET button has two functions:
6
33 cm minimum when the product is operated
W
ARNING
with a plug-in 3G USB device which has
maximum of 7 W ERP output power.
• Reboot: Press the RESET button for at least 1, but no
more than 5 seconds with a paper clip or a pencil tip to
reboot the unit.
• Restore to Factory Defaults: Press and hold the
RESET button for more than 5 seconds to reboot the unit
and restore to factory defaults. Changes that you have
previously made to the RV315W settings are lost.
Cisco RV315W Broadband Wireless VPN Router Quick Start Guide