Remote Control Unit - Sanyo SAP-DMRV93GJ Technical & Service Manual

Display
HIGH POWER button
1 HR. TIMER button
OFF TIME setting button
ON TIME setting button
Return button
Advance button
SET button
CANCEL button
CLOCK button
ACL button
NOTE
Transmitter
Sensor
Display
HIGH POWER button
ON/OFF operation button
1 HR. TIMER button
(1-HOUR OFF TIMER)
Temperature setting
buttons (TEMP .)
8

Remote Control Unit

Sensor
The illustration above pictures the remote control unit after the cover has
been lowered and removed.
When you press the buttons on the remote control unit, the
appears in the display to transmit the setting changes to the receiver in the
air conditioner.
A temperature sensor inside the remote control unit senses the room
temperature.
Information on the operating conditions is displayed while the remote
control unit is switched on. If the unit is turned off, only the mode that was
set previously is still displayed.
: When you press this button, the current operation mode is set to the
HIGH POWER mode, and the unit is operated in this mode for
15 minutes.
This button is for turning the air conditioner on and off.
: When you press this button, regardless of whether the unit is
operating or stopping, the unit operates for one hour and then
shuts down.
Press the button to increase the set temperature.
Press the button to reduce the set temperature.
For details, see Automatic operation and Manual operation.
Transmitter
(Cover closed)
ON/OFF operation button
Temperature setting buttons (TEMP .)
ECONOMY button
MODE selector button
FAN SPEED selector button
FLAP button
A/C SENSOR button
ADDRESS switch
Battery compartment (Pull off the
cover to expose the batteries.)
Model No.: RCS-3MVHPS4E
mark
OI-645-08EG