Sanyo SAP-DMRV93GJ Technical & Service Manual page 40

Operation selector
IMPORTANT
Avoid using radio equipment such as mobile phone near
(within 1 m) the remote control receiver. Some radio
equipment may cause malfunction of the unit.
If the trouble happens, disconnect power and restart the air
conditioner after a few minutes.
Remote control receiver
Operation selector
ON position
OFF position
WARNING
TEST position
CAUTION
OPERATION lamp
TIMER lamp
6
Remote Control Receiver and Operation Selector
This section picks up infrared signals from the remote control unit
(transmitter).
This position is for operating the air conditioner with the wireless
remote control unit.
Set the selector normally in this position.
Switch the selector to the OFF position if you are not going to use the
air conditioner for a few days or longer.
The OFF position does not disconnect the power. Use the main power
switch to turn off power completely.
This position is used only when servicing the air conditioner.
Do not set at the TEST position for normal operation.
This lamp lights when the system is in the continuous AUTO (orange or
green), DRY (orange) and COOL (green) mode.
This lamp lights when the system is being controlled by the timer.
TIMER lamp
Receiver
OPERATION lamp
OI-645-06EG