Replacing the I/O board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your
computer, follow the instructions in
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.
Procedure
1
Align the screw holes on the I/O board with the screw holes on the
computer base.
2
Replace the two screws (M2x3) that secures the I/O board to the
computer base.
3
Slide the I/O-board cable into the connector on the I/O board and close
the latch to secure the cable.
Post-requisites
1
Follow the procedure from step 3 to step 9 in
and keyboard
2
Replace the
rear
3
Replace the battery.
4
Replace the
base
52
computer. After working inside your
assembly".
cover.
cover.
After working inside your
"Replacing the palm rest