Removing The Display Assembly; Prerequisites; Procedure - Dell Inspiron 15 Gaming Service Manual

Removing the display
assembly
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your
computer, follow the instructions in
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.

Prerequisites

1 Remove the
2 Remove the battery.
3 Remove the
4 Remove the
5 Follow the procedure from step 1 to step 8 in
and keyboard

Procedure

1 Using the pull-tab, disconnect the camera cable from the system board.
2 Peel off the camera cable from the computer base.
3 Note the antenna cables routing and remove the antenna cables from the
routing guides on the computer base.
4 Remove the screw (M3x3) that secures the display-cable bracket to the
system board.
5 Lift the display-cable bracket off the computer base.
6 Using the pull tab, disconnect the display cable from the system board.
82
computer. After working inside your
base cover.
rear cover.
wireless card.
assembly".
After working inside your
"Removing the palm rest