Philips 150MT Electronic User's Manual page 27

TV Control
10 Sound mode
11 Previous programme
12 Screen information
Selecting TV
13
programmes
PC/TV mode
14
selection
Smart picture
15
controls
16 Numerical keys
17 Programme List
file:///D|/TV/english/150mt/osd/tv_control.htm (3 of 10) [12/24/2002 11:43:27 AM]
To switch from STEREO to MONO or to choose
between Dual I and Dual II for bilingual
transmissions.
For TV sets fitted with NICAM reception,
depending on the transmission, you can switch
from NICAM STEREO to MONO or choose
between NICAM DUAL I, NICAM DUAL II and
MONO.
If using Teletext, press this button to display dual
pages on screen.
To access the last programme viewed.
To display/clear the programme number, the name (if it
exists), the time, the sound mode and the time
remaining on the timer.
Hold down for 5 seconds to permanently display the
programme number on the screen.
The volume level and the smart control adjustments are
then displayed each time they are used.
To move up or down a programme.
The number, (the name) and the sound mode are
displayed for a few seconds.
For some TV programmes the title of the programme
appears at the bottom of the screen.
To select TV or PC mode
To select your desired picture setting from 5 picture
settings: RICH, NATURAL, SOFT, MULTIMEDIA and
PERSONAL.
For direct access to programmes
For a 2-digit programme number, the 2nd digit
must be entered before the dash disappears.
If using TV 'STANDBY', press any of number keys
to return to 'ON'
To navigate through a list of installed programmes to
obtain a quick overview of the programmes & activate
the programmes you have selected.