Philips 150MT Electronic User's Manual page 99

Using other menus (NTSC_1)
Press the MENU button on the remote control to
1.
show the on-screen menu.
Press repeatedly until INSTALL is highlighted.
2.
Auto Program
Press the MENU button on the
1.
remote control to show the
on-screen menu.
Press repeatedly until INSTALL
2.
is highlighted.
file:///D|/TV/english/150mt/osd/n_other.htm (2 of 7) [12/24/2002 11:44:11 AM]
RETURN TO TOP OF THE PAGE
Press
3.
LANGUAGE will be highlighted.
Press
4.
PROGRAM control is highlighted.
Press
5.
scanning of channels.
6. Press the MENU button repeatedly to
Press to shift the
3.
menu to the left.
Press once to
4.
highlight the TUNER
MODE.
Press to highlight the
5.
tuner option.
With the TUNER MODE
6.
set to AUTO, Auto
Program (see left) will
detect whether or not
cable input is present. If,
however, you want to set
the TUNER MODE to
CABLE or ANTENNA,
press or
CABLE or ANTENNA is
highlighted.
Press the MENU button
7.
repeatedly to clear the
menu from the screen.
Smart Help
When CABLE is selected, channels
1-125 are available. When
ANTENNA is selected, channels
2-69 are available.
to shift the menu to the left.
repeatedly until the AUTO
to start the Auto Program
until either