Philips 150MT Electronic User's Manual page 119

Using other menus (NTSC_2)
Setting up the Access Code
TM
AutoLock allows parents to block out or
'censor' any channels they think children
should not watch. A channel blocked by the
TM
AutoLock control cannot be viewed until
a correct access code is used to unlock the
channel for viewing. First, let's set your
AutoLock access code.
file:///D|/TV/english/150mt/osd/n_f.htm (9 of 17) [12/24/2002 11:44:30 AM]
graphic violence (V), explicit sexual
situations (S), or crude, indecent language
(L).
RETURN TO TOP OF THE PAGE
1.
2.
3.
4.
5.
6.
7.
8.
9.
Press the MENU button on the
remote control to show the
on-screen menu.
Press twice to highlight
FEATURES.
Press and the menu will shift to
the left. Then press
highlight the AutoLock control.
Use to highlight ACCESS CODE.
Press 0, 7, 1, 1 on the remote
control. INCORRECT will appear on
the screen.
Press 0, 7, 1, 1 on the remote control
again. ENTER NEW CODE will
appear on the screen.
Enter a new four-digit code using the
number buttons. CONFIRM CODE
will appear on the screen.
Enter your new four-digit code again.
CORRECT will flash on the screen
briefly and the highlight bar goes
back to AutoLock.
Press the MENU button repeatedly
to clear the menu from the screen.
once to