Using other menus (NTSC_1)
Manual
The Fine Tuning feature allows you to
adjust picture reception in an area of
poor reception.
file:///D|/TV/english/150mt/osd/n_other.htm (3 of 7) [12/24/2002 11:44:11 AM]
clear the menu from the screen.
Smart Help
After you've run Auto Program, check the results.
Press the CHANNEL (+) or (-) button and see which
channels you can select.
Remember an antenna or Cable TV signal must be
connected to your Monitor TV first (see the
Monitor TV
If you want to delete any unwanted channels from the
memory of the Monitor TV, see the
section.
RETURN TO TOP OF THE PAGE
Press the MENU button on the remote
1.
control to show the on-screen menu.
Press
2.
highlighted.
Press
3.
4.
Press
highlighted.
Press
5.
FINE TUNE is highlighted.
Press
6.
the channel until the desired picture and
sound is obtained.
Press
7.
Press
8.
status.
9.
Press the MENU button to clear the
menu from the screen or wait for the
on-screen menu to time out and
disappear from screen.
RETURN TO TOP OF THE PAGE
connection' section)
repeatedly until INSTALL is
to shift the menu to the left.
repeatedly until MANUAL is
to shift the menu to the left.
to start fine-tuning. Fine-tune
to highlight STORE.
to store the last fine-tuned
'Basic
'Channel
Edit'