for Living 088-0832-2 User Manual page 6

6
Model No. 088-0832-2
Step 1:
Insert threaded rod (AA) into each hole in bottom of back (A), then connect seat (B) to back (A)
with flat washers (CC), spring washers (BB) and nuts (FF), as shown in Fig. 1. Do not tighten
at this step.
Step 2:
Insert threaded rod (AA) into each leg-hole in seat (B), then connect legs (C) to seat (B) with flat washers
(CC), spring washers (BB) and nuts (FF), as shown in Fig. 2. Tighten all the nuts using wrench (DD).
FF
BB
CC
AA
Fig. 1
FF
BB
CC
AA
Fig. 2
B
A
C
B