Rigging The System - Montarbo PALCO PLUS User Manual

user's manual user's manual
english english
48

3. RIGGING THE SYSTEM

This chapter contains important information about flying a PALCOPLUS
line array system, as well as a description of the elements and safety
precautions.
Our goal is to allow the user to become familiar with the procedures
to be followed while flying the acoustic system, as well as the safety
measures to be taken during set-up and disassembly.
Before performing any operations related to flying the system, read the
present chapter first, and heed the warnings and advice given.
Only experienced persons with the required knowledge of the equipment
and local safety regulations should fly speaker systems.
It is the user's responsibility to ensure that the systems to be flown
(including flying accessories such as structures, hoists, chains and cables)
comply with applicable government and local regulations.
The working load limits stated in this manual have been certified by
independent laboratories.
It is the user's responsibility to comply with loads limits, safety factors,
resistance values, periodical checks and all the warnings given in this
manual.
The suspension accessories supplied by Montarbo are suitable for rigging:
• up to 8 RA16 speakers with a B2 BUMPER
• up to 8 RA16 speakers with a B1 BUMPER, when using a single suspension
point
• up to 16 RA16 speakers with a B1 BUMPER, when using two suspension
points.
The loading capacity of the suspension accessories supplied by Montarbo
have been certified by an external structural design consultant.
A partial copy of the certification document is enclosed in the appendix.
The compete document, in it's original form, is available at the Montarbo
main offices.