Switching On And Off; Setting Up; Restarting The Device; Caring For Your Pro 2020 - TomTom PRO 2020 User Manual

Switching on and off

Turning on the display
To turn on the display, press the On/Off button on the top left of your PRO 2020 once or tap the
display.
Dimming the display
To reduce the brightness of the display of your PRO 2020, press the On/Off button once briefly
and then release it.
Turning off the display
To turn off the display of your PRO 2020, press the On/Off button twice briefly and then release it.
If the display is dimmed already, you may press the On/Off button once only.
Note: The display turns off automatically, when the ignition of the vehicle is switched off for
more than 30 seconds.

Setting up

Note: The language you choose will be used for all text on the screen. You can always change the
language later in the Settings menu.
When you first switch on your TomTom PRO 2020, you have to answer a few questions to set it
up. Answer the questions by touching the screen.

Restarting the device

In rare cases, your TomTom PRO 2020 may not start correctly or may stop responding to your
taps.
In those cases you can perform a reset. To do this, press and hold the On/Off button until your
PRO 2020 begins to restart.

Caring for your PRO 2020

It is important to take care of your device:
Do not open the casing of your device under any circumstances. Doing so may be dangerous

and will invalidate the warranty.
Wipe or dry the screen of your device using a soft cloth. Do not use any liquid cleaners.


Help

You can get help by going to telematics.tomtom.com/support.
For warranty and privacy information go to telematics.tomtom.com/legal.
8