USING YOUR PC78XL+
TURN PC78XL+ ON/OFF
Turn the VOL knob clockwise until the unit turns on and the display
backlight turns on.
Turn the VOL knob counter-clockwise to turn the unit off.
CB MODE
Be sure that the power source, antenna, and micropone are properly
connected before proceeding.
Basic Settings
1. Turn the unit on. Set the volume to a comfortable level.
2. Set switch to CB.
3. Turn the CH knob to select a CB channel.
4. Set noise limitations switch to NB/ANL.
5. Adjust squelch.
Adjust SQ knob fully clockwise so only strong signals can get
•
through.
Adjust SQ knob fully counter-clockwise until you hear a hiss.
•
Everything gets through - noise, weak signals, and strong
signals.
Slowly adjust SQ knob back clockwise until the hiss stops.
•
Only clearer signals get through.
Set SQUELCH only when the radio is not receiving a strong signal.
6. Adjust RF GAIN knob set RF Gain sensitivity.
7. Adjust DELTA knob to reduce or eliminate adjacent channel
interference.
8. Set meter switch to S/RF.
PA MODE
Using the PA mode requires an optional speaker.
1. Switch to PA.
2. Press and hold PTT to speak.
7