Mazda 6 2017 Owner's Manual page 487

Table of Contents

Advertisement

Signal
"Keyless System Malfunction" is displayed
This message is displayed if the advanced keyless entry & push button start system has a
problem.
Contact an Authorized Mazda Dealer.
(Amber)
KEY Warning
"Ignition is On" is displayed
Indication
*
This message is displayed when the driver's door is opened without switching the ignition
off.
"Key Not Detected" is displayed
This message is displayed when any of the following operations is performed with the key
out of the operational range or placed in areas inside the cabin where it is difficult for the
key to be detected.
 The push button start is pressed with the ignition switched off
 The ignition is switched on
 All doors are closed without switching the ignition off
If any malfunction occurs in the keyless entry system, it illuminates continuously.
(Red)
(Illuminate)
KEY Warning
Light
*
The light remains turned on if there is a problem with the system. Have your vehicle
inspected at an Authorized Mazda Dealer.
(Amber)
NOTE
High Beam Control
If the windshield area in front of the Forward Sensing Camera (FSC) is fogged or
System (HBC)
obstructed, the light turns on temporarily. If the light remains turned on, there may be a
Warning Light
*
problem with the system.
The Warning indication/Warning light turns on if there is any malfunction in the i-ELOOP
i-ELOOP Warning
system. Consult an Authorized Mazda Dealer.
Indication
*
The "Front Radar Sensor System Malfunction" is displayed if there is a malfunction in the
(Amber)
system while the Mazda Radar Cruise Control (MRCC) system is on. Have your vehicle
Mazda Radar
inspected at an Authorized Mazda Dealer.
Cruise Control
(MRCC) Warning
Indication
*
Warning/Indicator Lights and Warning Sounds
CAUTION
If the message is indicated, or the push button start indicator light (amber) flashes, the
engine may not start. If the engine cannot be started, try starting it using the emergency
operation for starting the engine, and have the vehicle inspected at an Authorized
Mazda Dealer as soon as possible.
Refer to Emergency Operation for Starting the Engine on page 4-10.
CAUTION
If the key warning indicator light illuminates or the push button start indicator light
(amber) flashes, the engine may not start. If the engine cannot be started, try starting it
using the emergency operation for starting the engine, and have the vehicle inspected
at an Authorized Mazda Dealer as soon as possible.
Refer to Emergency Operation for Starting the Engine on page 4-10.
Warning
If Trouble Arises
7–27
*Some models.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents