Table of Contents
Advertisement
11 Phone
settings
You can customize the settings to
make it your own phone.
Display settings
You can change the display of the
phone during standby mode.
Set the contrast of the display
You can set the contract of the
handset screen to different levels.
1
Select [Menu] > [Phone setup] >
[Display] > [LCD contrast], then
press [OK] to confirm.
2
Select an option, then press [OK]
to confirm.
Set the visual ring
When the visual ring is activated, the
display backlight will flash when there
is an incoming call.
1
Select [Menu] > [Phone setup] >
[Display] > [Visual ring], then press
[OK] to confirm.
2
Select [Flashing on]/[Flashing off],
then press [OK] to confirm.
» The setting is saved.
Base backlight
You can activate the base backlight
within a certain time period when the
phone is in standby mode.
Activate/Deactivate the base backlight
1
Select [Menu] > [Phone setup] >
[Display] > [Base backlight], then
press [OK] to confirm.
2
Select [On]/[Off], then press [OK]
to confirm.
» The setting is saved.
Set the base backlight duration
1
Select [Menu] > [Phone setup] >
[Display] > [Base backlight] > [On],
then press [OK] to confirm.
2
Follow the screen instruction to
set the time duration, then press
[OK] to confirm.
» The setting is saved.
Eco mode
The Eco mode reduces the
transmission power of the handset
and base station when you are on a
call or when the phone is in standby
mode.
1
Select [Menu] > [Phone setup] >
[Eco mode], then press [OK] to
confirm.
2
Select [On]/[Off], and press [OK] to
confirm.
» The setting is saved.
» ECO is displayed in standby
mode.
Note
•
When ECO mode is set to [On], the
connection range between the handset and
the base station can be reduced.
EN
25
Advertisement
Table of Contents
