Download  Print this page

Get Started; Connect The Base Station - Philips M770 Extended User Documentation

Design cordless phone; design cordless phone with answering machine
Hide thumbs

Advertisement

3 Get started

Caution
Make sure that you have read the safety
instructions in the 'Important safety
instructions' section before you connect and
install your handset.
Connect the base
station
Warning
Risk of product damage! Ensure that the
power supply voltage corresponds to the
voltage printed on the back or the underside
of the phone.
Use only the supplied power adapter to
charge the batteries.
Note
If you subscribe to the digital subscriber line
(DSL) high speed internet service through
your telephone line, ensure you install a DSL
filter between the telephone line cord and
the power socket. The filter prevents noise
and caller ID problems caused by the DSL
interference. For more information on the
DSL filters, contact your DSL service provider.
The type plate is located on the bottom of
the base station.
1
Connect each end of the power
adapter to:
the DC input jack at the bottom
of the base station;
the power socket on the wall.
2
Connect each end of the line cord
to:
the telephone socket at the
bottom of the base station;
the telephone socket on the
wall.
EN
7

Advertisement

loading

  Also See for Philips M770

  Related Manuals for Philips M770

This manual is also suitable for:

M775