Table of Contents
Advertisement
Woofer replacement continued:
Push down
Push down
5 5
The positive (solid yellow) and negative
(yellow and black) cables are still
attached to the woofer terminals.
Remove the cables from their terminals
simply by pushing down on the terminal
and pulling out the cable.
6 6
The picture on the right shows what the
SR1530 looks like with the grill and woofer
removed . Place the new woofer (part
#0008873-01) where the old one was.
Follow the same steps as above, but
backwards 5 to 1, making sure to keep
the led PCB assembly cable in front of
the woofer. Power up the SR1530 and
the new woofer should now be pumping
out glorious lows. Awesome, you just
replaced a 15" woofer!
* *
If you fi nd it too diffi cult to connect the
cables to the woofer terminals due to
the short length of the cables, there is an
easier (albeit lengthier) way to connect
them. Instead of reconnecting the
cables to their terminals, just attach the
woofer to the cabinet as normal. Follow
steps 1-6 on how to remove the horn
assembly (pages 7-8) as this is an easier
way to access the woofer terminals
without having to work under such tight
circumstances!
6
Advertisement
Table of Contents
