Table of Contents
Advertisement
Led PCB replacement continued:
5 5
Use the phillips head screwdriver to
remove one screw near the center of
the led PCB assembly.
6 6
Carefully remove the led PCB assembly
from the back side of the grill.
7 7
The hard part is done, the rest is easy!
Place the new led PCB assembly (part
#0007334) where the old one was. Follow
the same steps as above, but backwards
6 to 1. Power up the SR1530 and the led
should light up. Congratulations, you just
replaced an led PCB assembly...now go
play some shows!
4
Advertisement
Table of Contents
