Multiheadlock Switch (Head Lock); Long Hair Trimmer; Travel Lock; Low Charge - Braun 9 SERIES Manual

• During charging the respective battery segment will blink.
• When fully charged all battery segments will light up for a few seconds then the
display turns off.

Low charge

The low-charge light
able to finish your shave. With switching off the shaver a beep sound reminds of the
low charge status.
The last 9 minutes of remaining shaving time are displayed in digits (depending on
your model / display).
Cleaning status (only models with Clean & Charge Station)
The cleaning indicator
Clean&Charge Station.

Travel lock

The lock symbol
starting of the motor (e.g. for storing in a suitcase).
Using the shaver
Press the on/off switch (4) to operate the shaver.
Tips for a perfect dry shave
1. Always shave before washing your face.
2. At all times, hold the shaver at the right angle (90°) to your skin.
3. Stretch your skin and shave against the direction of your beard growth.

MultiHeadLock switch (head lock)

To shave hard-to-reach areas (e.g. under the nose) slide the MultiHeadLock switch
(3) down to lock the shaver head. The shaver head can be locked in five positions.
To change position, move the shaver head with your thumb and forefinger back or
forth. It will automatically click into the next position.
Only models with Clean & Charge Station: For automatic cleaning in the Clean&Charge
Station the head lock should be released.

Long hair trimmer

To trim sideburns, moustache or beard press the release button (8) and slide the long
hair trimmer (6) upwards.
Travel lock
• Activation: By pressing the on/off switch (4) for 3 seconds the shaver is locked.
This is confirmed by a beep sound and the lock symbol in the display. Afterwards
the display turns off.
28
flashes red when the battery is running low. You should be
lights up when the shaver needs to be cleaned in the
lights up when the shaver has been locked to avoid unintended
(see fig. A)